VLAN Switch
From Tardis
Using Tardis' VLAN switch
We have a very nice 24 port Cisco Catalyst 2900 XL switch donated by User:sjh. It runs Cisco IOS Version 12.0(5.1)XP [c2900XL-h2s-mz-120.5.1-XP.bin]. Cisco have a configuration guide and command reference online.
It runs a telnet server on the admin VLAN at 192.168.1.4 and is connected to Racnoss. Here's a dump of the switchport config:
Current configuration: ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname Switch ! enable password 7 ##################### ! ! ! ! ! ! no spanning-tree vlan 1 ip subnet-zero no ip domain-lookup ! ! ! interface FastEthernet0/1 description router (ace) switchport trunk encapsulation dot1q switchport trunk allowed vlan 1-6,1002-1005 switchport mode trunk ! interface FastEthernet0/2 description piper switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/3 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/4 description wotan switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/5 description oracle switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/6 description mantis switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/7 description none switchport access vlan 4 spanning-tree portfast ! interface FastEthernet0/8 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/9 description one switchport access vlan 4 spanning-tree portfast ! interface FastEthernet0/10 description delphon switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/11 description orgi switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/12 description cluster switchport access vlan 4 ! interface FastEthernet0/13 description skaro switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/14 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/15 description mara switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/16 description adric switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/17 description leela switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/18 description adric switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/19 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/20 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/21 description spiderport spanning-tree portfast ! interface FastEthernet0/22 description trogdor switchport access vlan 5 spanning-tree portfast ! interface FastEthernet0/23 description none switchport access vlan 3 spanning-tree portfast ! interface FastEthernet0/24 description none switchport trunk encapsulation dot1q
To configure another port connect to the switch via telnet or via Racnoss and do something like:
Switch>en Password: Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int fa0/16 Switch(config-if)#description HOSTNAME Switch(config-if)#switchport access vlan 3 Switch(config-if)#spanning-tree portfast Switch(config-if)#exit Switch(config)#exit Switch#
Use write memory to save your changes to the flash memory once you are happy with the new configuration.
The old 3com switch is also kicking around.
