CALL US

0086-371-55629010

MAIL US

2019/8/12 · The output of a 1 ton boiler is 700,000 kcal, and so on. The output of a 10 ton boiler is 7 million kcal. Second, the fuel consumption calculation formula. Fuel consumption = boiler output ÷ fuel calorific value ÷ boiler thermal efficiency. According to the above method, the user can calculate the gas consumption of the gas steam boiler

Read MoreHourly fuel consumption per BHP: * No.6 Oil: 152,000 Btu/gal. = 0.275 gallon/BHP/hr. * No.5 Oil: 149,000 Btu/gal. = 0.280 gallon/BHP/hr. * No.2 Oil: 142,000 Btu/gal. = 0.295 gallon/BHP/hr. * 1000 Btu/cu ft Gas = 42 cu ft/BHP/hr. * 800 Btu/cu ft Gas = 53 cu ft/BHP/hr. * 500 Btu/cu ft Gas = 84 cu ft/BHP/hr.

Read More2021/2/12 · Therefore Total air = (1 + 25.78/100) X 5.5 = 6.92 kg of air per kg of fuel burnt 4-A Coal fired boiler having total heating surface area 5200 M2 produces 18 kg of steam per square meter per hour of heating surface, then calculate the Boiler capacity in TPH

Read MoreBoiler load - the capacity of a steam boiler - is often rated as boiler horse powers, lbs of steam delivered per hour, or BTU. Lbs Steam delivered per Hour Large boiler capacities are often given in lbs of steam evaporated per hour under specified steam conditions.

Read More2015/3/17 · Steam, Boiler, and Blowdown Pressure are the same. Combustion Efficiency is the % of fuel energy that is directly added to the feedwater and not otherwise lost or used. Blowdown Rate is the % of incoming feedwater mass flow rate that leaves the boiler as a saturated liquid at boiler pressure.

Read More2015/6/2 · Calculation Of Water Consumption And Fuel A Boiler - posted in Industrial Professionals: Excuse my English. Dear, I am doing my project of memory and partly it must conduct an analysis of the feasibility of putting into operation a boiler, that while I keep the approximate amount of steam that I produce, I could not find a way to estimate consumption water and fuel would be. Well, the

Read MoreHourly fuel consumption per BHP: * No.6 Oil: 152,000 Btu/gal. = 0.275 gallon/BHP/hr. * No.5 Oil: 149,000 Btu/gal. = 0.280 gallon/BHP/hr. * No.2 Oil: 142,000 Btu/gal. = 0.295 gallon/BHP/hr. * 1000 Btu/cu ft Gas = 42 cu ft/BHP/hr. * 800 Btu/cu ft Gas = 53 cu ft/BHP/hr. * 500 Btu/cu ft Gas = 84 cu ft/BHP/hr.

Read More2006/11/3 · BHP boiler horsepower Lb/Hr pounds per hour Fe factor of evaporation (can be assumed to be equal to 1) CYCLE OF CONCENTRATION OF BOILER WATER What is the cycle of concentration if the chloride content of boiler water is 186 ppm and the Where,

Read More2008/11/20 · As cold water, 15000 kg is about 15000 L. However, I assume this is a closed system, the steam flows to a radiator or other load, is condensed and returned to the boiler. So the same water may make several trips per hour through the steam system and return

Read More2021/7/29 · Steam Boiler, Model: ST28 - MCPD Compliant The ST28 steam boiler offers the following key features and optional upgrades:* Emissions fully compliant with MCPD. * Further NOx reductions achievable with the introduction of flue gas recirculation. * Output range of 1000 kg/hr to 6000 kg/hr F&A 100 C at a nett efficiency of up to 95% in accordance with EN12953.

Read MoreBoiler Horsepower What is the boiler horsepower of a boiler generating 21,500 lbs of steam per hour at 155 psi? The factor of evaporation is 1.08. BHP = Cycle of Concentration of Boiler Water What is the cycle of concentration if the chloride content of boiler water is

Read MoreBoiler load - the capacity of a steam boiler - is often rated as boiler horse powers, lbs of steam delivered per hour, or BTU. Lbs Steam delivered per Hour Large boiler capacities are often given in lbs of steam evaporated per hour under specified steam conditions.

Read More2019/4/17 · Take the 10 ton gas fired boiler for example, we will introduce how to calculate the fuel consumption of the boiler. The 10 ton gas fired boiler has an output of 10 tons per hour, which is also the capacity of the boiler.

Read MoreBoiler horsepower - a power unit from the 19 th-20 th centuries - was used to rate the capacity of a boiler to deliver steam to steam engines. A common definition of one boiler horsepower is the amount of energy required to produce 34.5 pounds (15.65 kg) of steam per hour at pressure and temperature 0 psig (0 bar) and 212 o F (100 o C) - with feed water at pressure 0 psig and temperature 212 o F.

Read More