Difference between revisions of "Archive:Racnoss"
From Tardis
(→Telnet Ports) |
(→Hardware) |
||
| Line 1: | Line 1: | ||
==Hardware== | ==Hardware== | ||
| − | Racnoss is a Cisco 2511 router with one breakout cable to connect 8 asynchronous serial devices. We could do with another similar cable as it has another port for 8 more devices. | + | Racnoss is a [http://www.cisco.com/en/US/docs/routers/access/2500/software/user/guide/acsvrug.html Cisco 2511] router with one breakout cable to connect 8 asynchronous serial devices. We could do with another similar cable as it has another port for 8 more devices. |
| − | It currently provides serial consoles for some of Tardis' PCs. | + | It currently provides serial consoles for some of Tardis' PCs. |
==OS== | ==OS== | ||
Revision as of 17:42, 5 November 2007
Hardware
Racnoss is a Cisco 2511 router with one breakout cable to connect 8 asynchronous serial devices. We could do with another similar cable as it has another port for 8 more devices.
It currently provides serial consoles for some of Tardis' PCs.
OS
It runs Cisco IOS Version 10.2(8a).
Usage
Telnet Ports
Access from davison with
$ telnet cisco-serial <port>
| Host | Line | Telnet Port |
|---|---|---|
| mara | 1 | 2001 |
| skaro | 2 | 2002 |
| piper | 3 | 2003 |
| wotan | 4 | 2004 |
Administration
Racnoss runs a telnet server and is also connected to the Spiderport for administration. To setup a new port connect to Racnoss and run the following:
Racnoss>en Password: Racnoss#conf t Enter configuration commands, one per line. End with CNTL/Z. Racnoss(config)#int a Racnoss(config)#int async 5 Racnoss(config-if)#description HOSTNAME Racnoss(config-if)#no ip address Racnoss(config-if)#async mode interactive Racnoss(config-if)#exit Racnoss(config)#exit Racnoss#
